Changes between Version 3 and Version 4 of Hand/262/HardwareSetupSettings


Ignore:
Timestamp:
May 11, 2011, 4:41:02 PM (9 years ago)
Author:
edison
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Hand/262/HardwareSetupSettings

    v3 v4  
    88[[Image(htdocs:bhand/figure8.png)]]
    99
    10 '''Figure 9 - Installing on Bench Stand.'''
     10'''Figure 9 - Installing on Bench Stand with Wire Strain Relief.'''
    1111}}}
    12 
    13          
    14 a) place base on Hand   b) attach threaded ring c) attach Hand cable
    15 
    16              
    17 d) screw in 2 retainer screws   e) open cable clips     f) secure all 3 clips
    18 Figure 8 - Lab Bench Stand with Wire Strain Relief
    1912
    2013Use the 2-mm hex wrench to open fingers 1, 2, & 3.  Then, spread fingers to roughly 120 degrees and rest the unit on its fingertips.  Place the stand, feet up, onto the hand.  Note the alignment of the !BarrettHand™ relative to the wire strain relief clips to ease connection of the !BarrettHand™ Cable.