Changes between Version 2 and Version 3 of Hand/262/SafetyFeaturesPrecautions


Ignore:
Timestamp:
May 17, 2011, 8:33:20 PM (13 years ago)
Author:
edison
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Hand/262/SafetyFeaturesPrecautions

    v2 v3  
    1818        * Do not exceed the load limit of the fingers, 2 kg per finger.  Consider all loading situations including accelerated loads, cantilever loads from long objects, robot collisions, active loads, etc.
    1919
    20         * Remove/replace the fingers only as instructed in Section 7.3.
     20        * Remove/replace the fingers only as instructed in the user manual and on this wiki.
    2121
    22         * Monitor the operating temperature of the !BarrettHand™ so that it does not exceed 65C.  Under normal conditions, the Hand operates between 40 and 60C.  The !BarrettHand™ was designed with non-backdrivable finger joints to take advantage of the motors’ peak operating performance in short bursts.  The spread, however, is backdrivable to aid in target-independent grasping (see Section 9.3.1) and requires constant motor current to actively hold position.  Idling the spread motor, when possible, will help keep the temperature lower.
     22        * Monitor the operating temperature of the !BarrettHand™ so that it does not exceed 65C.  Under normal conditions, the Hand operates between 40 and 60C.  The !BarrettHand™ was designed with non-backdrivable finger joints to take advantage of the motors’ peak operating performance in short bursts.  The spread, however, is backdrivable to aid in target-independent grasping and requires constant motor current to actively hold position.  Idling the spread motor, when possible, will help keep the temperature lower.