Changes between Version 13 and Version 14 of Hand/280/KinematicsJointRangesConversionFactors


Ignore:
Timestamp:
Jan 7, 2016, 10:43:07 PM (8 years ago)
Author:
cv
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Hand/280/KinematicsJointRangesConversionFactors

    v13 v14  
    33== Finger Drivetrain and TorqueSwitch™ ==
    44
    5 It is easiest to understand Barrett's patented TorqueSwitch™ mechanism by first understanding the operation of the BarrettHand finger assembly.  The image below shows a single finger without the rest of the Hand, including all critical drive elements.
     5It is easiest to understand Barrett's patented TorqueSwitch™ mechanism by first understanding the operation of the BarrettHand finger assembly.  The image below shows a single finger, including all critical drive elements, with the motor windings and rest of the hand hidden.
    66
    77{{{
     
    1313
    1414
    15 This second image is a close-up of the drive elements in the finger.  During normal operation, the motor shaft/pinion (gray) drives both the distal (yellow) and proximal (blue) gears, which transmit power through their respective worms (red and green) and into two worm gears (orange and purple).  The proximal worm gear (purple) is tied directly to the proximal link with six screws, whereas the distal gear (orange) connects to the distal link via mechanical cable.  The net result is a motion ratio of 93.75:1 for the motor shaft to proximal joint position and a 125:1 reduction for the motor shaft to distal joint position.
     15This second image is a close-up of the drive elements in the finger.  During normal operation, the 16-tooth motor pinion (gray) drives both the 30-tooth distal (yellow) and 40-tooth proximal (blue) gears, which transmit power through their respective worms (red and green) and into two 50-tooth worm gears (orange and purple).  The proximal worm gear (purple) is tied directly to the proximal link with six screws, whereas the distal gear (orange) connects to the distal link via mechanical cables.  The net result is a motion ratio of 93.75:1 for the motor shaft to proximal joint position and a 125:1 reduction for the motor shaft to distal joint position.  Also, note the two magnets (light blue) and their associated Hall-array sensors (black) at the ends of the motor shaft and worm shaft.  These two encoders allow the Puck to determine the position of both joints in the finger (the proximal link via the worm sensor and the distal link via the motor sensor).
    1616
    1717{{{
     
    2222}}}
    2323
    24 The connection between the proximal worm (green), the belleville washers (pink) and the proximal gear (blue) is the critical part of this assembly that makes the TorqueSwitch™ work.  The proximal gear is internally threaded, and rides on threads cut into the worm shaft, while the belleville washers are compressed between the side of the gear and a shoulder on the shaft.
    25 
    26 When the proximal link contacts a stiff surface, the resultant resistance in the worm causes the gear to back off the washers by twisting back up the threaded worm shaft.  The resistance must be sufficiently large to overcome the friction between the gear and shaft that comes from the belleville washer compression.  The sequence of images below shows this process.
     24The connection between the proximal worm (green), the belleville washers (pink) and the proximal gear (blue) is the critical part of this assembly that makes the TorqueSwitch™ work.  The proximal gear is internally threaded, and rides on right-handed threads cut into the worm shaft, while the belleville washers are compressed between the side of the gear and a shoulder on the shaft.  The compressed bellevilles create Coulomb friction in the assembly that holds the gear stationary relative to the worm.
     25
     26When the proximal link contacts a surface, the resultant torque in the worm causes the gear to "break away" from the Coulomb friction and wind off the washers along the shaft.  The sequence of images below shows this process.
     27
    2728{{{
    2829#!div class="center" align="center"
    2930[[Image(htdocs:bhand/282/PreBreakaway.png)]]
    3031
    31 '''The worm and proximal gear rotate together at first.'''
     32'''The worm and proximal gear rotate together at first, linked across the belleville washers via Coulomb friction.'''
    3233}}}
    3334
     
    3738[[Image(htdocs:bhand/282/Breakaway.png)]]
    3839
    39 '''When the proximal link encounters adequate resistance, the proximal gear backs off the belleville washers and the link stops moving.'''
     40'''When the proximal link encounters adequate resistance torque, the friction breaks away and the proximal gear winds off the belleville washers.  From this point forward, the proximal link remains locked in place.'''
    4041}}}
    4142
     
    4546[[Image(htdocs:bhand/282/PostBreakaway.png)]]
    4647
    47 '''The proximal gear then moves up the worm shaft, leaving the proximal link immobile but allowing the distal link to continue to move.'''
    48 
    49 '''Enough threaded shaft is provided such that the distal link will close fully before the proximal gear runs out of space.'''
    50 
    51 '''The distal link continues until it closes around the object.'''
    52 }}}
    53 
    54 The TorqueSwitch™ is reset by opening the finger fully.  This drives the proximal gear against the belleville washers when the proximal link contacts its joint stop, preloading the system appropriately.  The amount of prelod can be altered by changing the "OT" parameter in the Puck driving that finger.
    55 
    56 Finally, it is important to note the two magnets and their associated magnetic encoders at the ends of the motor shaft and worm shaft.  These two encoders allow the Puck to determine the position of both joints in the finger (the proximal link via the worm encoder and the distal link via the motor encoder).
     48'''The proximal gear then winds up the worm shaft, directing motor torque to drive the distal link.'''
     49
     50'''The threaded shaft is long enough to allow full range-of-motion for the distal link in any scenario.'''
     51
     52'''All motor torque is directed to the distal link until the bellevilles are re-engaged by reversing the motor.'''
     53}}}
     54
     55The TorqueSwitch™ is reset by opening the finger fully.  This drives the proximal gear against the belleville washers when the proximal link contacts its joint stop, preloading the system appropriately.
     56
     57The amount of preload can be altered by changing the "OT" parameter in the Puck driving that finger.
     58
     59
    5760
    5861== !TorqueSwitch™ ==