Changes between Version 3 and Version 4 of Hand/280/SystemComponentList


Ignore:
Timestamp:
May 17, 2011, 7:39:14 PM (8 years ago)
Author:
edison
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Hand/280/SystemComponentList

    v3 v4  
    9292}}}
    9393=== Strain gage Joint-Torque Sensors ===
    94 Barrett Technology offers a factory-installed torque sensor for the BH8-SERIES System.  This sensor measures the torque externally applied about the distal joint over a range of +/- 1 N-m (+/-2 kg at finger tip is about 20 N @ 5 cm = +/- 1 N-m).  This option uses strain gages to measures the differential tension in the “tendon” running through each finger to the second joint.  The information is processed in additional on-board circuitry when this option is installed; it is accessed by requesting the present strain gage property.  The strain gage property represents the amount strain on the strain gage sensors.  The strain gage values can be calibrated by the customer to relate strain to joint torque.
     94Barrett Technology offers a factory-installed torque sensor for the BH8-280 System.  This sensor measures the torque externally applied about the distal joint over a range of +/- 1 N-m (+/-2 kg at finger tip is about 20 N @ 5 cm = +/- 1 N-m).  This option uses strain gages to measures the differential tension in the “tendon” running through each finger to the second joint.  The information is processed in additional on-board circuitry when this option is installed; it is accessed by requesting the present strain gage property.  The strain gage property represents the amount strain on the strain gage sensors.  The strain gage values can be calibrated by the customer to relate strain to joint torque.