Changes between Initial Version and Version 1 of Hand/282/FastenerCheck


Ignore:
Timestamp:
Jul 16, 2013, 6:45:10 PM (11 years ago)
Author:
dc
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Hand/282/FastenerCheck

    v1 v1  
     1= BarrettHand BH8-282 Fastener Check =
     2All screw fasteners in the !BarrettHand™ have been installed with a thread locker, which should prevent loosening over the life of the product.  However, after prolonged use, Barrett Technology recommends that you conduct a precautionary inspection to ensure all external fasteners are in place and tight.  Ideally, this inspection should occur monthly under heavy use conditions.
     3
     4Should any fasteners have become dislodged during operation, contact Barrett Technology for replacements or replacement specifications.  Do not replace fasteners without contacting Barrett Technology as many fasteners have strict length specifications. 
     5
     6{{{
     7#!div class="center" align="center"
     8[[Image(http://web.barrett.com/supportFiles/wikiFiles/Hand_fasteners_annotated.PNG)]]
     9
     10'''Figure - Important Fastener Locations'''
     11}}}