= BarrettHand BH8-282 Fastener Check = All screw fasteners in the !BarrettHand™ have been installed with a thread locker, which should prevent loosening over the life of the product. However, after prolonged use, Barrett Technology recommends that you conduct a precautionary inspection to ensure all external fasteners are in place and tight. Ideally, this inspection should occur monthly under heavy use conditions. Should any fasteners have become dislodged during operation, contact Barrett Technology for replacements or replacement specifications. Do not replace fasteners without contacting Barrett Technology as many fasteners have strict length specifications. {{{ #!div class="center" align="center" [[Image(http://web.barrett.com/supportFiles/wikiFiles/Hand_fasteners_annotated.PNG)]] '''Figure - Important Fastener Locations''' }}}