Changes between Version 1 and Version 2 of Hand/282/StrainGageMaintenance


Ignore:
Timestamp:
Aug 16, 2013, 1:02:55 PM (11 years ago)
Author:
dc
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Hand/282/StrainGageMaintenance

    v1 v2  
    1313        }}}
    1414
    15         1. BH8-262 users should run the program Monitor Strain.  This program will continuously sample the strain gage values and print them to the screen.  Another option is to run the !BarrettHand Control GUI and poll for strain values.
     15        1. BH8-282 users should run the program Monitor Strain.  This program will continuously sample the strain gage values and print them to the screen.  Another option is to run the !BarrettHand Control GUI and poll for strain values.
    1616        1. Adjust the balancing potentiometer using a small flat head screwdriver until the desired value is reached.  The balancing potentiometer requires very small adjustments, due to its sensitivity.  Apply as little pressure as possible on the balancing potentiometer during adjustment.  See Figure 24.
    1717